DH18DBQL(HX) -18V Slide Brushless Rotary Hammer with Quick Release Chuck

18V Slide Brushless Rotary Hammer with Quick Release Chuck
 Back to: 18V Slide Brushless


    • 2.6 Joules High Impact Energy increases drilling speed and demolition performance 
    • 3 Modes (rotation + hammering; rotation only; hammering only) extends applications across multiple trades 
    • Brushless Motor is 30% more efficient than conventional models as no energy is wasted through brush friction, thus extending battery run time 
    • Quick Release Chuck allows for fast change between SDS Plus and Keyless drill chuck 
    • Neutral Lever Position allows for multiple chisel angles to be selected ensuring multiple chisel bits and applications can be achieved 
    • RFC (Reactive Force Control) is an electrical safety function that alleviates the danger caused by high torque. RFC senses if the housing begins to rotate too quickly and stops the motor to reduce kickback 
    • Slip Clutch Mechanism – if the tool mechanically detects a sudden and excessive torque, it works by disengaging the drive from the motor 
    • Improve Handling with the soft grip of the handle close to the centre of gravity. The grip of the handle and the drill bit head are on the same line of action which makes applying force to the drill easier, enabling users to drill straight with ease whilst holding the machine firmly and comfortably 
    • Electronic switch is more efficient in transferring energy and only requires half the pull force of conventional switches 
    • Ultra bright LED for well lit work area 
    • Rapid charger with cooling system and USB port achieves a fast charging time while maintaining constant communication with the battery to monitor the charging process 
    • Extreme high capacity 6.0Ah Li-ion batteries with multiple protection circuit provide long run time and protects the battery & tool from overload, over heat, 4 over discharge and over charge 
    • Also available Naked - DH18DBQL(H4) 

Barcode: 4966376252602








No load speed

0 – 1,050 (min-1)

Impact rate

0 – 3,950 (min-1)

Chuck type

Quick Release SDS Plus/Quick Release 13mm Keyless Metal Chuck


4.0kg (with BSL1860 battery)


384mm (with BSL1860 battery)

Battery type

BSL1860: 18V 6.0Ah Lithium ion slide

Standard Accessories

2 × BSL1860 batteries, UC18YSL3 rapid charger with cooling system & USB port, stackable case IV, side handle and depth gauge.